Use Precaution for the forklift engine

We, Xiamen Impetus Industrial Co., Ltd, a professional manufacturer for forklifts and forklifts attachment with more than 20 years experiences. We provide one-stop solution for material handling equipment, with OEM and ODM service. Our products are in the high level quality, very competitive price and 24hrs on line after service by strong R and D technical support.

We have wide range of forklifts, diesel, electric, LPG and gasoline t, heavy duty, Terrian rough, reach truck, pallet stackers, etc.

Here below I’d introduce you the use precautions of diesel forklift engine for your main idea.

I. Precautions for engine use

1. After a new engine or overhaul, the diesel engine cannot work at full load and high speed at the beginning. It must be run-in at low speed and light load for 50 hours before it can be transferred to normal operation.

2. Ensure the cleanliness of the fuel. Filter through sediment or silk cloth if necessary.

3. Maintain normal water temperature (70-85°C) and engine oil pressure (0.2-0.4MPa at medium speed).

4. During operation, if any abnormality is found, immediately stop the machine for inspection.

5. It is not advisable to use “hard water” as cooling water to prevent scaling and reduce the service life of the engine.

II. Daily maintenance

1. Check whether the oil level in the oil pan is between the two engraved lines of the oil dipstick and close to the upper engraved line. For a new machine or a diesel engine that has been out of service for a long time, after filling the engine oil to the upper mark line, stop at a low speed for 5-10 minutes, and measure the oil level with the oil dipstick again.

2. Check the water volume of the water tank.

3. Check the oil level in the fuel injection pump, and replenish it to the specified position if it is insufficient.

4. Eliminate three leaks (oil, water, gas).

5. Check the firmness of parts and accessories.

6. Check the cleanliness, remove oil and dust, and pay special attention to the drying and cleaning of electrical equipment.

7. After the new machine has been operated under light load for 50 hours, the engine oil (including the oil in the fuel injection pump) and the oil filter element should be replaced in time, and the oil pan and oil filter should be cleaned.

8. Timely protection of daily lubricating oil additives.

Here above is for your reference. If any more request or questions, pls freely contact with us at random. And freely go ahead to see our web www.impetusforklift.com to learn in details.

Leave a Reply

Your email address will not be published. Required fields are marked *